SunStar SIU Tough Guy Vacuum System 40' Single Stage 125K BTU U-Tube Heater

Description

SIU Tough Guy Vacuum System 40′ Single StageSunStar 125K BTU U-Tube Heater Product Details

* Ready to Ship * Proudly Made in the USA * Fastest Delivery *

SIU Tough Guy Vacuum System Tube Heaters U Tube – Single Stage Completely Aluminized Steel Construction for High Humidity and Corrosive Environments

Whether you need to heat your warehouse. garage. or other hard-to-heat spaces. the Sunstar SIS/U Series infrared heaters provide both the fuel efficiency of radiant heat and the installation flexibility you need…and all at a comfortable price.

Key Features:

• Pull Through System
• 6 different Btu sizes and more than 60 different configurations to custom design your infraredheating system
• CSA design certified
• Available in natural and propane gas
• Sidewall or through the roof venting
• Vented or indirect vented operationOptional U-bend Reflector
• Includes 36″ stainless steel gas connector

Check out the SunStar SIU Tough Guy Vacuum System 40′ Single Stage 125K BTU U-Tube Heater now here at Flame Authority. your trusted dealer!

Features

Features:

Vacuum System

• Products of combustion are pulled through thecombustion chamber for increased radiant efficiency and greater safety
• No draft hoods. totally enclosed combustionchamber
• Heavy-duty draft inducer assembly with permanently lubricated. totally enclosed and heavy-duty ball bearing motor for maintenance-freeoperation
• 30 second per-purge period before ignition
• Diaphragm air switch for proof of venting before gas flow and ignition

Burner System

• Heavy-duty cast iron burner
• Reliable direct spark ignition system and 100%
• Gas Shut-Off Safety Control
• Burner inspection sight glass
• Step-opening redundant combination gas valvefor quiet ignition and added safety
• Inside or outside air for combustion
• Up to 50 ft. outside combustion air capability
• Diagnostic Monitoring Light System

Radiant Emitter Tube System

• 4” O. D. heat-treated aluminized steel combustion chamber (10′ length)
• Standard highly emissive radiant tubes (10′ lengths) Optional aluminized steel radiant tubes (Though Guy Option)
• 5-year limited warranty on all tubes
• Suitable for horizontal or angle mounting up to 45°
• Up to 75 feet sidewall vent capability

Reflector System

• Highly efficient aluminum reflectors
• Individual reflectors can be rotated up to 45° todirect heat where needed
• Optional end. corner. U-bend and side extensionreflectors

Manuals

Manuals:

• SIU Spec Sheet
• Pull Vs Push-Thru Reference Chart
• SIU Installation and Operation Instructions
• Accessories

Need assistance? Talk to an expert at +1-800-923-4556 or email [email protected]–Kitchen to get the best-suitedheaterfor your needs.

Specifications

Specifications:

• Model:
• SIU12540TG
• Total Tube Length:
• 40′
• Overall Dimensions “L” (FT):
• 22′ 9″
• Fuel Type:
• Natural Gas
• LiquidPropane
• Burner Pressure:
• 3.5″ W.C.
• 10″ W.C.
• Supply Pressure:
• Min.5″ W.C. Max. 14″ W.C.
• Min.11″ W.C.. Max.14″ W.C.
• Voltage:
• 120 VAC 60 Hz
• Amps:
• 2.4
• Ignition Type:
• Direct Ignition

SIS Minimum Mounting Heights

• Height at Horizontal:14′
• Height at 45° Angle:13′

NOTES:Since straight tubes are always hotter at the burner end than at the exhaust end. always observe the minimum recommended mounting heights shown on the specification sheet for greatest human comfort. Use SIU series instead of SIS series for spot heating applications.SIS Clearances to Combustibles

• Side:32″
• Ceiling*:6″
• Below:82″
• End:20″
• (45°) Front:66″
• (45°) Rear:12″

Reminders:

*When used indirect vented. minimum clearance for Ceiling must be: 12″ for SIU 50-75. and 18″ for SIU 100-175. If optional corner and U-bend reflectors are not used. the clearance must be 18″.

**Maximum clearance below reduces by 50% once you are 25 ft. downstream from the control box.